R/C Tech Forums - View Single Post - BUGGY SERVO SPECS
View Single Post
Old 11-20-2014 | 11:39 PM
  #3  
murat61
Tech Adept
 
Joined: Jan 2014
Posts: 157
Default

Yes agreed with previous post. Torque values are good for both cars. Speedwise, 0.08 and 0.11 are good enough values. There are some servos which are both very fast and they have high torque values.

Savox 2274 0.08/60degree, 350 oz in torque, 92usd
Futaba sv9352 0.06/60degree, 300 oz in torque, 149usd
Radiopost signature series: 0.07/60degree, 459 oz in torque , 139usd.
murat61 is offline