R/C Tech Forums - View Single Post - NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
Thread: NEW HOBBYWING STOCK SUPERCHARGED SOFTWARE
View Single Post
Old 11-09-2014 | 12:30 AM
  #12014  
DriveItLikeYSIT's Avatar
DriveItLikeYSIT
Tech Master
iTrader: (93)
 
Joined: Jun 2012
Posts: 1,337
From: Florida
Default
Originally Posted by COBRARACING
ok please tell me what software you are using ,what type of motor 540 or 550 and how many pole .please also let me know what setting is your voltage cut off set to.I will also ask can you please run a full battery through your sct with no sensor cable plugged in and let me know if it still cuts out with the throttle.
the latest software is installed on the esc; it think it's V3.2_140627. I'm using the Xerun 3656 4000kv 4pole motor; lvc is set to 2.8v. I ran the 4wd without the sensor wire plugged in and the throttle did not cut off.
DriveItLikeYSIT is offline  
Reply