View Single Post
Old 11-07-2014, 02:17 AM
  #4  
rc-man
Tech Initiate
 
Join Date: Aug 2013
Posts: 24
Default

I used to run kyosho hor and ZH201. Both 1/8 and the ZH have front and rear disk brake. The rims on the ZH do fit the hor. But for front you need 5mm spacer, and rear you need the ZH wheel adapter. Dish brakes will not fit the hor as the hor use the "swing" steering system, so as soon as you pull the brakes the steering will pull to one side. For motor we all use brushless. For the hor use 1/18 system with 5000-9000kv. For the ZH use inner runner short motor from 450 helicopters, around 7000kv. ESC anything 60A will be more than enough.
rc-man is offline