Originally Posted by
flame56mx
Just an FYI, the Serpent shack caps do not work. The thread pitch is close enough that they appear to be working, but actually thread bind before touching the cap seal properly. Close, but no cigar...
I wish I could post a picture. I have been running the serpent caps for two race weekends with zero issues. The fronts screwed right on while the rear caps showed resistance. It may seem that they don't work , but there was coating in the threads that needed cleaned out. Once the threads were cleaned out,, the caps screwed on with ease. I used the emulsion seal in the cap and have zero leaking issues.