R/C Tech Forums - View Single Post - Kyosho Ultima RB6 & RB6.6 Car Thread
View Single Post
Old 10-27-2014, 09:37 PM
  #10975  
3srcracing
Tech Master
iTrader: (29)
 
3srcracing's Avatar
 
Join Date: Nov 2011
Location: Utah
Posts: 1,931
Trader Rating: 29 (100%+)
Default

Built the car, with the most part no problems. Messed up the steering, need to go back and take a look at it.

And I couldn't build the diff so save my life. For some reason no matter what I did I couldn't get the bolt to thread on the nut (in the insert). Originally thought it was the wrong nut, so I took it apart to see nope threads right on. What might I be doing wrong? Double triple checked to make sure everything is assembled correctly. (never had diff issues before this)

Thanks in advance.

Pulled apart and compressed the spring some more. Still the same thing. Couldn't get the tnut piece out and broke the stupid thing. And still stuck in the outdrive. Hope tomorrow I can get it out without ruining the outdrives. About to give up on this car already.

Last edited by 3srcracing; 10-27-2014 at 10:24 PM.
3srcracing is offline