Hello everyone,

I'm building my first 1/12 pan car and need some help with gearing.

I have a*12r5.1*running a 7200mah 1s lipo, 6.5t trinity D4, and 1s hobbywing xerun esc, tyres are 46mm front and rear.

I will only be running this car in front of my house on smooth asphalt paved street. Not really into carpet tracks or racing.

My question is what would be a good pinion / spur combo for this setup? I was thinking 86t spur/40t pinion? Also, what timing should I run on the esc AND the motor can?

Thanks for your thoughts