Originally Posted by
DiscountRCStore
Ok... We don't have anyone running the mid motor at the moment, however, measuring the stock mount against the blinky mount, the lay shaft looks to mount in the exact same place on both mounts. The difference being solely in the position that the motor itself mounts - so the the mm belts should work fine. Measuring further, we get ~20mm difference (on center) for the motor position itself, moving it ~20mm rearward - depending of course on the exact ratio you'll be running. hopefully this helps and gets you going in the right direction ...
..p
Thank's that is very good info.
Cheers Paul