Originally Posted by
Mo Denton
also FYI for those that aren't a huge fan of the stock brakes. I saw Matt was testing the fiber brakes from the e buggy options and I put them on the new car I built. have to awesome!
so if you are looking for a different brake set up you can do it with all tekno parts!
I've been using these brakes since around April. The longer I use them the happier I am. One big thing to know first...when you run these brakes for the first time...run them HARD, do a practice where you're not concerned about lap times and just be aggressive with the brakes. They need to break in a little. After one good run, adjust your break pad screws and you should be good to go. When you do a center diff fluid change or about 90-120min worth of run time, LIGHTLY sand the pads with 400grit sand paper just to knock some of the build up off. Otherwise I love them. No brake fad. They have the same STOPPING power as the metal rotors they just get a softer feel so they're not so grabby.