Originally Posted by lpittman

I'm always 40g over at 770g. I run the LW Protoform AMR 12, Titanium screws, ORCA VX1, 16awg wire, MKS 8910A+ servo, D4 13.5, tires trued down to basically rim, ProTek 6400mAh, Sanwa 472 Rx and Hybrid MyLaps. All wires are as short as possible. No roll-over post. Graphite axle.

Only balance weight I have is about 6g to balance the pod on the spur side.

I tried removing the servo posts and using double sided tape but that only saves about 4g.

Any tips?

Luke