Originally Posted by madweazl

The Nightfox body arrived and it actually fits quite well. Next time around, I'll leave about 1/2" more material in front of the nose cut line and notch the raised parts for the shock tower mounts in hopes of keeping the body from cracking and maybe give it a softer, pointed shape vice the blunt end it has now. The hole for the engine is about 1/2" further forward than the cut lines (in the forward position). The rest is pretty straight forward.



The top of this body sits very low compared to the stock body. I'm going to remove the Losi tank pull because I dont want it getting snagged on anything (it can come out of the body by about 1" if upside down).



The fuel lines are very tight at the front of the buggy and the forward most retainer is almost touching the body at rest. Past that, it opens up pretty well and provides at least as much room as the stock body. There seems to be ample room for the throttle linkage and the header has plenty of room as well.