Originally Posted by
davetamiya
Have got a fair bit of slop in the front hub bearing inserts. Any thing I can try to remove this? Second set of hubs and inserts on the car along with new bearings
Go with this
http://www.amain.com/JConcepts-B5-B5...le-Set/p360097
and
http://www.amain.com/JConcepts-B5-B5...s-Blue/p360098
or
http://www.amain.com/Lunsford-Associ...-Axles/p291810
The FT setup is good too, just heavier. It seems a lot of people have slop in the front hub assembly. You can CA glue your inserts in place, I would recommend buying spares so you can have a glued set for 2 3 and 4mm trailing. By upgrading from the stock setup you will help take a lot of that slop out, and your bearings won't get gritty as fast.