Originally Posted by
MarkA
You will need to clarify exactly what happened to what wires. For example, there is no BEC wire running to the motor, BEC is what powers the receiver which passes that through to the servo.
That being said, the cause of the servo glitch is likely a loss of BEC input to the servo or output from the ESC altogether.
Ok sensor wire from esc to the rear of a Tekin t8 motor. It came free from the esc and was still plugged into the motor. We have a hitec hs965mg servo I have read about gray outs,but doesn't that usually effect both steerage and throttle control?