R/C Tech Forums - View Single Post - Kyosho Ultima SC6 Thread.......
View Single Post
Old 09-16-2014 | 10:08 PM
  #596  
Shark413's Avatar
Shark413
Tech Master
iTrader: (24)
 
Joined: Apr 2007
Posts: 1,554
From: SoCal
Default

Originally Posted by J-RO
Hey guys im having trouble with my truck spinning out in the higher speed corners, loosing rear grip right at the entrance of the corner, at my track I have a higher speed corner going into a big double on a straight stretch and then going into a couple of sweepers. Watt can I do to fix this problem.

Set up is.

Front Springs are what came in the kit
Rear springs White
40WF 30WR
Running MIP Bypass Kit
Short Front Camber links
4 Hole front Shock Tower
Maximum Amount Of Rear Toe Allowed By the Adjustable Hangers.
33mm front ride height
29-30mm Rear ride height

We are required to run a specific tire.

Track is a tight-mid length track on dirt.
What's your rear camber? Also the white springs are the softest and may be causing excessive chassis roll.
Shark413 is offline