Originally posted by WVRACER
yea thats what i was thinking if you did some type of captured end with a nut. would this hamper the way the shock is suspose to work. i was thinking of somthing like the associated tc shocks a bolt through the bottom a nut to hold it it place then a captured end on the shock amd a nut to hold it on
any ideas guys will this work
Rob
i think you may get some binding because the tc3 shock mount does not have enough angle of movement. and hte 12l shock has such a steep angle. Some of the guys run this put have to put a cone washer under the lower shock mount to raise it just enough where it does not bind.