Originally Posted by
John Wallace2
When you are discharging at high discharge rates (30+) what volt cutoff do you use? I've been going down to 7.o volts (2 cell pack). At first there was improvement. But after a few cycles I noticed a fall off in the packs I've been testing, (MAH, MWH, IR and average voltage). I was talking to another racer this weekend and he said his discharger only went down to 7.8V. PS I use my old Turbo 35 for discharging and recording data.
2 cell can go down to around 6.4 when cycling and to around 7.4 for storage