A quick question, I recently bought my first ever yokomo (after owning Associateds, Tamiyas and Serpents over the years) and can honestly say I'm an official convert and won't be going back.
I built my 14 Black Series on the weekend, and the rear end doesn't seem right, I have the camber links built to the suggested length of 50.5 mm but it fits so snug that the rear drive shafts are pushing heavily into the rear out drives. The rear belt is sitting snug not too loose or tight. The rear arms don't move up and down freely because the out drives and diff are effecting being "pinned" by the drive shafts.
Has anyone else experienced this and if so how is it fixed?
Cheers