R/C Tech Forums - View Single Post - Tekno RC EB48 Thread
View Single Post
Old 09-02-2014 | 01:13 PM
  #13415  
vwduud's Avatar
vwduud
Tech Fanatic
iTrader: (48)
 
Joined: Apr 2010
Posts: 967
From: Prairieville, LA
Default

Originally Posted by Cain
I think when thinking of added weight f the brake setup, keep in mind that the vehicle is balanced when you have the servo weight in the pod there from what I recall.
Indeed. With my Tekin stuff and GensAce 5300mAh soft pack, I'm close to balanced both left and right and front to back. When adding the brake servo and mechanics, I am obviously adding weight left and rear.

The article by Tekno (below) talks about getting this balance. For me, it may require getting a slightly lighter battery if I wanted to counter the left/right imbalance from the added weight of the brakes/servo. Front to rear would still be slightly affected though. Would just be a matter of adjusting the suspension to accommodate the additional weight (springs, shock positions, roll centers, etc.)

http://www.teknorc.com/2012/07/03/si...cale-electric/

Last edited by vwduud; 09-02-2014 at 01:45 PM.
vwduud is offline