Originally Posted by
valk
The s2s I built; I used hole d on the front arm and the second from inside on the tower. With the preload collar all the way out it gave 5-5.5 ride height with a ready to run 17.5 tc.
Alternately, you could get some xray short springs. Guy in our club runs 2.5 f/r
As for damper stiffness, I run 3 holes 350-450 cst. Might go stiffer for mod though.
I did fill the dampers with 450 (front) and 350 (rear) and all of them with a 3 holes piston.
I don't know the rate of the springs but when i campare them with my TRF dampers that are filled with 500 and 600 with also 3 holes pistons, tamiya White&Yellow springs they are a lot stiffer.
Are those Xray short springs also big bore springs?