Originally Posted by
Michael_T
Set ride height on blank rims. I set mine 1.0mm front, and 1.5mm rear.
Just check your chassis. If you find one end is not as scratched from hitting the ground, you can probably go lower on that end. Some tracks you run even front/rear heights, other tracks you may have to run higher rear.
Thanks for replay.
It is std advice for 1st step? Just asking, no offence.
It looks like RH depend then on foam on tires (normal for me).
What diameter of foams then you start?
In my case I set (compute for blank 50mm rims) I did usually 1.5mm front, 2.0-2.5 rear. Maybe this is wrong ... for me
because last time I lowered 1mm overall RH on my car (60/62.3) tires and car was slighty better
Just need to compare some infos in my head.