Originally Posted by
Dave H
Will your charger achieve 6 amps on a 2S? If so don't think you will see much benefit on a 2S, as each cell will still see 6 amps. If the higher cell count was current limited then you idea might be worth investigating further.
Unless the pack balance is way off don't expect much time saved in balancing. Still will have the relatively slow Constant Voltage portion of the charge where the amps drop off.
Ah there we go, it is pointless then as my Turnigy chargers will handle 6A @ 2S and won't supply any higher at 1S. As I said, probably terrible idea but interested in learning.
Thanks for your input!