R/C Tech Forums - View Single Post - HPI Sprint 2 Mods
Thread: HPI Sprint 2 Mods
View Single Post
Old 08-19-2014 | 02:50 PM
  #753  
snailman's Avatar
snailman
Tech Rookie
 
Joined: Apr 2014
Posts: 13
Default
Originally Posted by WaftyCrank
Just checked my own measurements at home and they differ to the ones stated too Dale.
These are my measurements below, hopefully someone else may be able to clarify on their own set up too

TOE LINKS: 1.41"
FRONT CAMBER LINKS: 1.466"
REAR CAMBER LINKS: 1.465"
SERVO LINK: 1.82"
ACKERMAN LINK: 1.920"
Looks like that will pull my camber back towards the negative scale but the toe is very close to what was previously mentioned.
snailman is offline  
Reply