Originally Posted by
acutts
Thanks Austin. I am running 1300 weight oil in the rear diff and the MR33 Red springs are rated at 301 so very similar to HPI Silver.
Current settings are 6mm ride height front and rear, 2 degree camber all round, 3 degree toe in at rear and 1 degree toe out front. Downstops at 6 front and 5 rear on Hudy tool.
I will definitely start by rebuilding the shocks with 0 rebound as a start and maybe buy the rear 2 degree axle block .
6mm is kind of high. Is the track u race on bumpy? If not lower the car and I'll have more overall grip. Also no need to buy new blocks... just flip them in the rear.
also 1 degree toe out in the front is a lot imo. I usually run heads up or maybe a tiny bit out. Going to heads up will also make it turn more initially when off power which is what u said u needed. So maybe take a little front toe out too. I'm not too sure about the ddown stop gauge because I measure my droop differently but still a little more rear droop will help as well.
Thanks