R/C Tech Forums - View Single Post - 2013 Torque line by Picco
Thread: 2013 Torque line by Picco
View Single Post
Old 08-04-2014 | 05:50 AM
  #403  
GREGORY!'s Avatar
GREGORY!
Tech Master
iTrader: (1)
 
Joined: Jun 2006
Posts: 1,110
From: Greece
Default
Originally Posted by KevcoRacing
Sorry, I had not been to forum.

Q1
correct head clearance (not quantity of shims but distance between piston to combustion chamber for 30% is 0,60mm
Shims may vary depending form production to production.

Q2
Shim under cylinder improves RPM. Less punch, remove it.

Q3
both Edo-X and "S" run with total head clearance 0,60mm measure with soldering wire of 1,00mm
he speak about emx type s .12 motor.
GREGORY! is offline  
Reply