R/C Tech Forums - View Single Post - 3 racing new F1
Thread: 3 racing new F1
View Single Post
Old 08-01-2014, 12:25 PM
  #4612  
angrymelon
Tech Master
iTrader: (1)
 
angrymelon's Avatar
 
Join Date: Aug 2008
Location: Portland, OR
Posts: 1,109
Trader Rating: 1 (100%+)
Default

Glamour shot:



Nekkid:



It doesn't have anything special. I'm running +1 degree of toe, -1 degree of camber front and back, 80 weight Associated oil in the shocks and 5.5mm ride height in the rear. I using the Pit Shimizu PS-0561 fronts and PS-0565 rears on stock FGX wheels. Everything else is built to the spec in the manual. It even still has the original 3racing oil in the gear diff. The only non-stock parts are the titanium front axles and the high speed gear set. I believe I'm running a 35T spur and 24 or 23T pinion. Sorry, I'm not so much a setup guy.

Electronics are a Futaba S9551 servo, Novak Edge ESC (only setting changed was reverse disabled) with a Ballistic 21.5. I have the brakes turned down on the radio to like 60%. Motor timing turned all the way up on the end bell.

It definitely isn't going to set the fastest lap, but it works pretty darn well

-melon
angrymelon is offline