R/C Tech Forums - View Single Post - Tamiya TT02 Thread
View Single Post
Old 07-30-2014, 02:52 PM
  #402  
addicted2blue
Tech Fanatic
 
Join Date: Jul 2010
Location: Antwerp, Belgium
Posts: 877
Default

Originally Posted by Qatmix
Hi Guys

Here is a guide to give the TT02 camber without those terrible thick aluminium arms

You can do it with all Tamiya Parts or buy a special little widget thingy

http://www.thercracer.com/2014/07/th...ar-camber.html
I've been reading your modifications and it suddenly came to my mind that the part you've especially made can be mad out of a tamiya part.
You could use the rocker nut from an IFS suspension with part nr 19808126.
The width of the damper stay is 7,3mm and the nut is 8,3mm, you could use a dremel to cut off 1mm or you could use some 0.5x5mm spacers.
One difference is that the rocker nut has got some thread in it, but it can be used for doing this modification.

I've also saw some time ago that there was a guy who fillped the A2 part and then you are able to use the upper camber mount from a TT01.
I haven't tried that cause i don't have the needed parts.
addicted2blue is offline