R/C Tech Forums - View Single Post - Yokomo MR-4TC SD
View Single Post
Old 01-26-2005, 04:56 AM
  #12019  
caveman
Tech Regular
 
Join Date: Oct 2003
Posts: 373
Default

The instructions uses the upper holes on the front suspension C-hubs, while most people use the lower holes. 60-61mm is long enough if you use the upper holes, 62-63mm if you choose the lower holes. For the rear 60-61mm is fine if you run the original shock tower. If you use Rayspeed tower (old style), then you need 64-65mm long.
caveman is offline