R/C Tech Forums - View Single Post - CRC 1/10 Pan Car
View Single Post
Old 07-22-2014, 04:19 PM
  #3811  
Still Bill
Tech Champion
iTrader: (16)
 
Join Date: Jan 2004
Posts: 7,379
Trader Rating: 16 (100%+)
Default

Originally Posted by 97806
LE with a 9650 servo, a 1 cell mounted forward, a Tekin RS Spec mounted behind the battery and a Revtech 13.5 mounted normal. All that's left is the receiver and receiver pack.

Took off the dampener tubes and unscrewed the tweak springs all the way up. Put the front wheels on scales and the left front is measuring 221 g and the right front is measuring 159 g. Going to pull the front end apart and rebuild tonight to see if I have something off/bent/binding etc. but that's still a pretty big difference. Even if I put the receiver and pack on the right side the balance on the front only changes about 5 g.
When you have the front end apart, make sure that the lower a-arms measure the same height above a setup board.

Bill
Still Bill is offline