R/C Tech Forums - View Single Post

07-10-2014 | 11:21 AM

#21552

Jamie Hanson

Tech Master

iTrader: (42)

Joined: Apr 2004

Posts: 1,423

From: Frederick, MD

Quote:

Originally Posted by Clawhammers

Please correct me if I'm wrong.

I currently use :
#54000 - M-Chassis Aluminum Damper Set
#54583 - M-05 Ball Head Suspension Shafts - Titanium Coated @ Front
#54296 - M-06 Ball Head Suspension Shafts - Titanium Coated @ Rear

I tried to install the shorter shock ends, but it lifted the front and rear arms, and the ground clearance were around 1 - 1.5 mm (with 55mm tires)

Therefore, I opted for longer version of the shock ends (available from #54000), and this provides better ground clearance for the chassis.

I think you built them right. When mounting the shock to the M-06 Ball Head Suspension Shafts you need the extra length. I know this to be true in the front end, but I am not sure about the rear.

Reply