Originally Posted by
sosidge
Well, it's certainly colourful...
Something looks wrong with the shock bottoms though, not sitting on the shock ends properly.
Originally Posted by
axle182
Looks like you have the incorrect shock ends on the shocks. You need to change them to the short ones to fit the mini.
Please correct me if I'm wrong.
I currently use :
#54000 - M-Chassis Aluminum Damper Set
#54583 - M-05 Ball Head Suspension Shafts - Titanium Coated @ Front
#54296 - M-06 Ball Head Suspension Shafts - Titanium Coated @ Rear
I tried to install the shorter shock ends, but it lifted the front and rear arms, and the ground clearance were around 1 - 1.5 mm (with 55mm tires)
Therefore, I opted for longer version of the shock ends (available from #54000), and this provides better ground clearance for the chassis.