R/C Tech Forums - View Single Post - Sanwa MT4 - RX-461 Binding HELP!!!
Thread: Sanwa MT4 - RX-461 Binding HELP!!!
View Single Post
Old 07-08-2014 | 01:49 PM
  #6  
richmondsir
Suspended
 
Joined: May 2014
Posts: 21
From: Yishun, Singapore
Default
Yup it does have SHR and SSR. I did bind it on NOR.

Originally Posted by dan_vector
I'm not sure if the MT-4 has SHR or SSR channel modes but if it does then make sure they are set to NOR, then rebind and re-calibrate the esc.
richmondsir is offline  
Reply