HarshGuy,
Try this. Go to function menu and select "SETUP". There, go to BT1 and assign it to ACCEL. Once that is set, press the BT1 button. Does the light go off/on? Let me know.
Originally posted by HarshGuy
I think I have a problem, although it doesn't seem to be affecting the radio functioninig ...but just hoping it isn't the "calm before the storm". Anyhow, the throttle acceleration light is always blinking, I never set throttle acceleration and in fact that was set to the factory defaults set to:
TH:ACCEL
WIDTH 0
POS.LOW 5
POS.HIGH 50
CYCLE 97
The manaul says with width of 0 that this is not set.
I've tried setting to as low as possible i.e.:
TH:ACCEL
WIDTH 0
POS.LOW 0
POS.HIGH 0
CYCLE 1
same results so I set them back to the factory defaults ...any ideas/and or you think this is a precursor to the controller imploding in my hands one day and taking out a 3 city block radius?