Hi Kimihiko San,
I am using the S.A.L. function. I just wonder how could cycle my cell for each time have the ICS equalised. I have the newest ICS unit and my pro-trak is able to control it now. When should I select in the S.A.L. menu?
I did the following setting:
-I turn off the toggle options.
-Start S.A.L.
-Peak Detect
-Audiable warning 0.1V
-Operatrion Cycle
-Equ after Cycle- yes
-Part charge-No
-Set Cycle - 3
-Cycle Time : 0
-Delay B4 P/Dis :0
-Delay B4 Repeak:0
-Delay Discharge : 0
- Pack Number - 1
I found that in the very 1st begining, it will discharge my pack to 5.4V then ICS will be triggered. After the ICS has carried all those cells below 0.1V. It starts to charge the pack again. Of course it will then discharge the pack to 5.4V again. But afterward, it does not trigger the ICS and start the charge/discharge at once. I have set the Cycle Time to 0. Since my ICS need 10 hours to bring my battery to 0.1V and I suppose it should long enough for the cell to rest. Should I modify the setting.
Pls help!
Thanks