Originally Posted by
chasingthepack
hi angelo,i have an orion r10 pro,(i believe hw built these for orion)im using the new v10 13.5 motor in boosted on a large outdoor track,i have good acceleration but lose some top speed against the others,can you recommend some boost/timing setting that will work better with this motor,any help much appreciated,my current settings are
1 =1
2 =0%
3 =3.0v
4 =level 9
5 = 87.5%
6 =25%
7 =20%
8 = 9%
9 = enabled
10= 40
11=2000
12=350
13= 34
14=24
15= 0.2 secs
and 30 degs on the motor geared at 5.70 and temps are around 85c
heres the track--https://www.youtube.com/watch?v=2zoZPqalnwk
im the 3rd car into the chicane the second orange car
Those settings look similar to the older HW v2.1. If option 11 is boost start rpm I suggest you up that to 4000/5000. If 13 is turbo then I expect the esc is only using 24 of it as the HW esc only uses 64 steps of boost and turbo combined. I race regularly at Cotswold track and run a FDR of 5.88 with similar settings on a v3 HW. What track are you running at to need 5.7?
