Originally Posted by hpiaddict

I upgraded my 2.0. Did this for about half the cost of a new buggy. Anyways, I used the 2.0 motor mount, I noticed that I have a lot of play in the center diff. More than 3mm of play. I noticed that its using some parts from the 2.0 in the center diff. I noticed that the motor mount did not line up with the holes. So I drilled into the chassis and countersunk the hole. After doing all that to the center diff, only issue I have is the play in the center diff. Is the motor mount that much thicker? Any help would greatly be appreciated. Thanks again.