Originally Posted by
vandalzzz
Is it ok to replace M4x10mm screws secureing rear braces to diff housing with longer ones - 14mm? I've read about issues with rear braces on EB48 vehicle, and one of the solutions mentioned was to replace 'em with longer version. Brace itself has thickness about 5mm where it lays on top of diff case, that gives only 5mm thread into housing, it's enough or not?
yes mate but no longer then 15mm screws as it goes to deep but apart from that the rear gear box on the nitro is fine and does not break out from what i have seen
but yeh 15mm wont hurt
