R/C Tech Forums - View Single Post - Speed Power E801GT
Thread: Speed Power E801GT
View Single Post
Old 05-07-2014, 08:42 AM
  #9  
Solara
Tech Champion
iTrader: (17)
 
Join Date: Sep 2002
Location: Chicago Illinois USA
Posts: 9,291
Trader Rating: 17 (100%+)
Default
Originally Posted by Lorents
Great idea routing the ESC wire underneath the battery tray. Will do that!

Thanks for the pictures Solara. Great setup you have there! What is your ride height?

Here is what I am running so far:
- Motor SKYRC TORO ARES X8ST 1550 KV 4 Pole Sensored
- ESC XERUN-150A-SD Sensored ESC
- Lipo ZIPPY Flightmax 4000mAh 6S1P 40C
- Tires Sweep Slick 45deg 6ix Pak

I use the same lipos in my helis and DIY e-bike. They are a perfect fit in the E801GT (W44 L147 H50 mm)
My ride height is front 8mm and rear 10mm, with 2mm droop front and 1mm rear. However, I think I will install the Serpent Cobra GT springs, yellow all around, or white front yellow rear....the stock spring feel a little in the soft side.
Solara is offline  
Reply