Originally Posted by fq06

When I swapped chassis there was not much if any change needed other than ride height and droop reset.

I have a setup at Petit with Tekno springs (Chris) but was 37.5wt 1.3 front & 35wt 1.4 rear. 1.3's all around drop down to 32.5. Sounds like thats where your at anyway. My setup may not be your setup so go with yours or maybe take a piece or two of mine to try out throughout the day. I would say any setup sheet with a stock chassis can be thrown on the bce and if its a loose track setup it would probably be a good starting point if your looking for a loose track setup.

I have been messing around with longer front camber link and less front kickup among other things so I may be posting a new one if I see improvements.