I just finished building the Yokomo R12 C3, everything came together perfectly. However, the one piece sway-bar is causing a minor tweak in the front suspension arm. I've done all I could to remedy the problem but it's still causing a slight tweak on the left suspension arm. The tweak is probably 0.2-0.5 mm.

Everything else in the suspension is spot on, all I need to do now is to figure out how to un-tweak the sway-bar.

I checked on the Yokomo Thread and there have been a few issues with the three piece causing suspension tweak, but mine is a one piece.

I was thinking of lightly sanding the ends of the sway bar which insert into the suspension arm. This would remove some material from the bar and maybe help correct the sway-bars imperfection.


Looky what I found !

http://m.youtube.com/watch?feature=y...&v=kzoqI-kQqQw