ok Balldiffs:
I seem to be having trouble setting the diff so that it doesn't slip but isn't too tight when you turn the wheels.
ok i have switched my 7.5turns motor to the reedy 6.0 mach2.
For more torque at the jumps and higer speed without using boost and to many turbo.
But it's like the drivetrain can't handle the motor.
First i set my diffs medium to tight, (run on a medium to high bite astro track).
Afther than i set my slipper.
But that's the problem, it's not the slipper that slips, they are my diffs that slips.
when i loose the slipper e little more it's like i run a 13.5 motor, no torque at all.
i use, new plates, new balls and muchmore diff grease.

Will i have a good amount of torque, i must tighten the diffs to max and even than it's not the torque i suspect of a 6.0 motor. the first meters other cars( like xb4, bmax,...) pull faster away. My setup can handle more power, but the drivetrain not :-/.



gts

Sven