Originally Posted by JimmyMac

Try this part number? ]

Originally Posted by .crispy

What kind of project? Like a science project? Most projects like that, you have to have a hypothesis, then you collect data on by testing.

How are you going to do that? You're not going to be able to see any difference unless you are a seriously good driver already.

The differences are slight and show up at different times. e.g., corner in vs. corner out.

The TT-01 is not a good test subject anyway. Your rear toe angles are limited by the rear bearing carrier. 0 and 2.

Front toe is adjustable with the optional turnbuckles but you really never have more than 1 degree out to 1 degree in.

Finally, camber, what are you going to do there, test from 0 to 4 degrees all the way around? 4 degrees of negative camber is too much.

Anyway, you don't need a "kit". You just need the turnbuckles that come with the TT01E Type R.