Just got done converting my v1 to a v2. Small tip if anyone wants to save their old front shock bodies and nitride shafts since those have not been released at the new size.
If you add one of
these inside the shock body it will be at the correct length to run the shock at full droop for the new arms. The reason being is we need to remove 3mm of total length of the shock at full extension, -1.5mm comes from the new shock body and -1.5mm comes from the new shorter shock shafts. Well the rubber stopper happens to be 3mm.
When I used the old arms I had the rubber stopper in order to limit my droop without having to use droop screws. So they fit right in perfectly at full droop with the new arms. I personally also added
these in order to limit my droop 2mm without the need of the droop screws this time around.