Originally Posted by
imprsme
Have you tried another sensor wire?
I didn't read anywhere that you had.
Not sure this will fix your issues but it's worth a try.
If it's "cogging" at low speed only.
What timing are trying to run on the motor?
With the Reedy make sure you have the proper insert and that it's positioned correctly.
It sounds like you are trying to over time it.
That would explain why it's working in Blinky and not in the mod settings
If all of that doesn't work maybe EA can chime in with something we are missing.
Good luck
I tried another motor and a new sensor wire with no luck
Motor is at 0 timing. It kinda helped with the issue but didn't solve it.
Even with the motor timing at 0 and the ESC timing at 1 it still has a cog like a sensorless setup would do from start.
If I run 10 degrees of motor timing(half of what the reedy comes set at) and just 1 degree of ESC timing it start cogging badly. Belts even start to vibratate harshly. Once I pass 1/2 throttle the system smooths out and sounds completely different. I assume at that point it's in turbo?
In blinky or 0 timing the system is very smooth regardless of motor timing
Like I said I've been trying all types of things to try and figure it out but no matter what I do if I have any ESC timing it begins to cog even with motor timing at 0 and ESC timing set to 1.