Okay for an all out as fast as possible drag machine I would for sure use Ceramics. I run them in both my Buggy and GT and absolutely love them. Top speed comes from being able to put every drop of power to the ground which means traction and as little drag as possible. I would suggest a Buku Speed Tune clutch so you can adjust to various amounts of traction, full on ceramics and a Drag Race modified motor. Again the Ultimate Build in my opinion.

Motor - http://www.murnanmodified.com/produc...roducts_id=704

Best Bearings - http://www.bocabearings.com/bearing-...nitro-off-road

Next Step down on Bearings - http://www.bocabearings.com/bearing-...nitro-off-road

Bearing Oil - http://www.bocabearings.com/bearing-...lightning-lube

Bearing Cleaner - http://www.bocabearings.com/bearing-...lightning-lube

Then lighten it up where you can and pull the throttle. Again this is what I would do for an ultimate build you can obviously spare change here and there. but once you decide going straight is fun come launch it down the back straight with us and then turn. See you at the track!