Well this is my initial setup that I'm going to test
Equal Shocks F/R (Kit Oil, 40 wt I believe, 2 Hole Pistons)
Sway Bar: Red
Inclined Shock Angle two spots on Rear, 1 spot on Front
Springs: Tamiya White on Rear, Tamiya Grey on Front
Camber: Starting with 2 degrees Camber front and Rear and will see what wear is like.
Castor: 4 Degree Aluminium
Ride Height, 6mm F/R
Foams: 42F Ellegi Front and 40R UFRA Rear
We'll see how we go. If my settings seem a bit weird, let me know. I'm kinda pissing in the dark at the moment until I actually get to the track. I should be running on an untreated surface too against only Rubber boys so we'll see how we go.