Old 03-17-2014, 05:05 AM
  #46023  
Errokk
Tech Addict
iTrader: (13)
 
Errokk's Avatar
 
Join Date: Jul 2013
Location: Mckenzie, TN
Posts: 659
Trader Rating: 13 (100%+)
Default

Originally Posted by Oztiger View Post
Hi all, i drive an SCTE, 50-100 c 6000 mha lipos, 5.5 t sensored Turnigy 550 motor and a Tekin RX8. You can see pix of my local track at FB Page Murgon RC. (Australia). Temps around 30-36 celcius. Thats air temp not motor temp Punch is down to 70 percent. No timing on the motor and a 16 tp. It is wicked fast. Not too many cars can catch it.

I am melting soldered wires, gluing deans connector together? I am at my wits end to work out a way to lower temps, Esc never temps out, motor dosent lose power but everything is real hot. It is even making a few of my older lipos start to swell.

All comments considered, children please abstain i would like opinion from people who know what they are talking about.

Cheers
The problem your experiencing is due to the deans not being able to handle the current demand of the motor and esc. Upgrade to ec5 or larger connectors which will have more contact surface and a tighter connection that won't cause them to heat up.
Errokk is offline