Originally Posted by
xxx123
I try to google the answer but still needs help please. Indoor clay track; medium bite. My b4 push when enter corner. My logic is that if i can loosen the rear end a bit, then i may have less push when i enter corner. And, if i can increase front end traction, push will be reduced? Thanks
Leave the front alone. Yes, you need the right tires, but even with the right tires the kit setup will push on high bite clay tracks.
For indoor clay the trick is loosening the rear end by flattening out the roll. The hot combo on this car was to shave the rear u-brace and run the inner ballstud with no washers or maybe 1mm and then use the "C-hub" on the factory team hubs.
Try this setup, which includes what I said above:
http://www.petitrc.com/setup/associa...Hobby20130519/
You won't have problems with push with this setup and the right tires.