R/C Tech Forums - View Single Post - ESC problem
Thread: ESC problem
View Single Post
Old 03-13-2014 | 08:27 AM
  #5  
dan_vector's Avatar
dan_vector
Tech Elite
iTrader: (27)
 
Joined: Oct 2013
Posts: 4,333
Default
Originally Posted by j holmes
I am trying to use either
1. 3S 11.1V 2100mAh(23.5 Wh) 20C(42 Amp)
or
2. 11.1v 3 cell 20C continuous discharge (100A) 5000mAh
max burst rate 40C (200A) min discharge volts per pack 9.0V
max volts per pack 12.6v

having problems starting my motors. I cant tell if it is the lipo or the ESC
Either of those is fine. I'm using 3s 2200 25C packs on my phantom quadcopter and thats plenty of power. I believe it'll be some issue with your setup of ESC etc. Go through it step by step, re bind, re calibrate and start eliminating things.
dan_vector is offline  
Reply