R/C Tech Forums - View Single Post - Tekno SCT410 Thread
View Single Post
Old 03-09-2014 | 08:48 AM
  #20108  
fq06's Avatar
fq06
Tech Champion
iTrader: (12)
 
Joined: Dec 2011
Posts: 5,646
From: Los Angeles
Default

Originally Posted by Racerz27
Smc 5000mah. 50c constant. 100c burst. Radio is a spectrum dx3
That could be it right there. What servo? Savox?

Originally Posted by fq06
Kind of sounds like lvc, except for the beeps. Your running kind of a small pack for 4x SCT.
Is there a wire anywhere near the buttons on the ESC?
Are there any wires near the buttons on the ESC like the sensor wire with a hard plastic sheath on it?

I still think that's not enough lipo for this truck but it may not be the issue. The other guy that posted is way under geared and I think your running the correct 17 to 18 tooth pinion. That will make a difference in the amperage that the ESC is pulling from the pack.
Race spec with more capacity is the pack to have for a heavy 4x SCT.

To test it, put current limiter very low and run it to see if the issue persists. You might want to add a glitch buster to your RX also. Those are notorious for brown outs.

Last edited by fq06; 03-09-2014 at 09:08 AM.
fq06 is offline