Great used v3 with some v4 updates.
Ran this indoors only. Recently ran at Motorama in February.
Buggy Details
-Front & Rear Tresrey Diff Hoops
-TD Alum Servo Arm
-Rear lower TD brass weight
-Rear side weights
-Unique drilled chassis with vent holes
-Titanium Nitride Shock shafts
-Proline body
-Alum Hexes front and rear
-Full Center Djoint Driveshaft Set
-AE Ball joints, RPM Long shank cups.
-Alum Mid Drive Gear plate
V4 Upgrades
-Front and Rear upgrade Type B Arms TD230036/TD230037
-Molded cross shafts and Gears TD310290
Comes with mad parts lot.
-Tons of arms, lots of new and used parts, Springs, Spurs etc.
Big Box of tires included. Some more wheels not shown will also be included.
Full set of small bore shocks with Titanium Nitride shafts and Tresrey MOS Coated shock bodies. For smoother tracks, I feel these shocks make the car less lazy/more agile. Large set of springs and replacement small bore parts included.
All Cross pins in all CVD’s were replaced before Motorama in February as were shock and diff oils.
The car in general was run with a chassis protector to limit wear.
There is damage to the Camber link mount on the rear Carbon Tower, you can see the large washer on there. I have a brand new Tower on order from Amain coming in Monday March 10th which I will include with the car.
Car is used and as such sold as-is. Will show signs of wear so don't expect miracles from a used ride
$240/SOLD in USA.
