R/C Tech Forums - View Single Post - Tekno SCT410 Thread
View Single Post
Old 03-05-2014 | 02:57 PM
  #19932  
tc5 man's Avatar
tc5 man
Tech Prophet
 
Joined: Oct 2007
Posts: 16,997
From: levittown pa
Default

Originally Posted by fq06
I liked the staggered piston setup I was running with Tekno 1.3r & 1.4f.
The xray pistons came with a couple other hole sizes right? Try what you've got.
If you want to go Tekno, I tried 1.3's and wasn't very happy with them. Bought 1.4's to use in the rear and it was much better. Used 37/35 oil with green springs.

That took $40 to get the two sizes wait...
If you don't find a good tune with the xrays, let me know and I'll mail a set of 1.3 & 1.4's to you for $15... I have two sets doing nothing in my pit box.



Yea i mean i did notice more pack with the Rear shocks with the 1.3/30w Pink springs but them springs are still to soft . The xray ones are 8x1.2 , 8x1.3, 10x1 .

How would doing something like 32w in the Rear shocks work on low grip with stiffer springs ? I know i lot of guys run 30w in the rear shocks at the tracks here .

The outdoor tracks here in the Northeast are the same most of the time its usually loose/dry/rutted/Hardpacked.
tc5 man is offline